7. Multiple Good Allocation Mechanisms#

!pip install prettytable

7.1. Overview#

This lecture describes two mechanisms for allocating \(n\) private goods (“houses”) to \(m\) people (“buyers”).

We assume that \(m > n\) so that there are more potential buyers than there are houses.

Prospective buyers regard the houses as substitutes.

Buyer \(j\) attaches value \(v_{ij}\) to house \(i\).

These values are private

\(v_{ij}\) is known only to person \(j\) unless person \(j\) chooses to tell someone.

We require that a mechanism allocate at most one house to one prospective buyer.

We describe two distinct mechanisms

A multiple rounds, ascending bid auction
A special case of a Groves-Clarke [Groves, 1973], [Clarke, 1971] mechanism with a benevolent social planner

Note

In 1994, the multiple rounds, ascending bid auction was actually used by Stanford University to sell leases to 9 lots on the Stanford campus to eligible faculty members.

We begin with overviews of the two mechanisms.

7.2. Ascending Bids Auction for Multiple Goods#

An auction is administered by an auctioneer

The auctioneer has an \(n \times 1\) vector \(r\) of reservation prices on the \(n\) houses.

The auctioneer sells house \(i\) only if the final price bid for it exceeds \(r_i\)

The auctioneer allocates all \(n\) houses simultaneously

The auctioneer does not know bidders’ private values \(v_{ij}\)

There are multiple rounds

during each round, active participants can submit bids on any of the \(n\) houses
each bidder can bid on only one house during one round
a person who was high bidder on a particular house in one round is understood to submit that same bid for the same house in the next round
between rounds, a bidder who was not a high bidder can change the house on which he/she chooses to bid
the auction ends when the price of no house changes from one round to the next
all \(n\) houses are allocated after the final round
house \(i\) is retained by the auctioneer if not prospective buyer offers more that \(r_i\) for the house

In this auction, person \(j\) never tells anyone else his/her private values \(v_{ij}\)

7.3. A Benevolent Planner#

This mechanism is designed so that all prospective buyers voluntarily choose to reveal their private values to a social planner who uses them to construct a socially optimal allocation.

Among all feasible allocations, a socially optimal allocation maximizes the sum of private values across all prospective buyers.

The planner tells everyone in advance how he/she will allocate houses based on the matrix of values that prospective buyers report.

The mechanism provide every prospective buyer an incentive to reveal his vector of private values to the planner.

After the planner receives everyone’s vector of private values, the planner deploys a sequential algorithm to determine an allocation of houses and a set of fees that he charges awardees for the negative externality that their presence impose on other prospective buyers.

7.4. Equivalence of Allocations#

Remarkably, these two mechanisms can produce virtually identical allocations.

We construct Python code for both mechanism.

We also work out some examples by hand or almost by hand.

Next, let’s dive down into the details.

7.5. Ascending Bid Auction#

7.5.1. Basic Setting#

We start with a more detailed description of the setting.

A seller owns \(n\) houses that he wants to sell for the maximum possible amounts to a set of \(m\) prospective eligible buyers.
The seller wants to sell at most one house to each potential buyer.
There are \(m\) potential eligible buyers, identified by \(j = [1, 2, \ldots, m]\)
- Each potential buyer is permitted to buy at most one house.
- Buyer \(j\) would be willing to pay at most \(v_{ij}\) for house \(i\).
- Buyer \(j\) knows \(v_{ij}, i= 1, \ldots , n\), but no one else does.
- If buyer \(j\) pays \(p_i\) for house \(i\), he enjoys surplus value \(v_{ij} - p_i\).
- Each buyer \(j\) wants to choose the \(i\) that maximizes his/her surplus value \(v_{ij} - p_i\).
- The seller wants to maximize \(\sum_i p_i\).

The seller conducts a simultaneous, multiple goods, ascending bid auction.

Outcomes of the auction are

An \(n \times 1\) vector \(p\) of sales prices \(p = [p_1, \ldots, p_n]\) for the \(n\) houses.
An \(n \times m\) matrix \(Q\) of \(0\)’s and \(1\)’s, where \(Q_{ij} = 1\) if and only if person \(j\) bought house \(i\).
An \(n \times m\) matrix \(S\) of surplus values consisting of all zeros unless person \(j\) bought house \(i\), in which case \(S_{ij} = v_{ij} - p_i\)

We describe rules for the auction it terms of pseudo code.

The pseudo code will provide a road map for writing Python code to implement the auction.

7.6. Pseudocode#

Here is a quick sketch of a possible simple structure for our Python code

Inputs:

\(n, m\).
an \(n \times m\) non-negative matrix \(v\) of private values
an \(n \times 1\) vector \(r\) of seller-specified reservation prices
the seller will not accept a price less than \(r_i\) for house \(i\)
we are free to think of these reservation prices as private values of a fictitious \(m +1\) th buyer who does not actually participate in the auction
initial bids can be thought of starting at \(r\)
a scalar \(\epsilon\) of seller-specified minimum price-bid increments

For each round of the auction, new bids on a house must be at least the prevailing highest bid so far plus \(\epsilon\)

Auction Protocols

the auction consists of a finite number of rounds
in each round, a prospective buyer can bid on one and only one house
after each round, a house is temporarily awarded to the person who made the highest bid for that house
- temporarily winning bids on each house are announced
- this sets the stage to move on to the next round
a new round is held
- bids for temporary winners from the previous round are again attached to the houses on which they bid; temporary winners of the last round leave their bids from the previous round unchanged
- all other active prospective buyers must submit a new bid on some house
- new bids on a house must be at least equal to the prevailing temporary price that won the last round plus \(\epsilon\)
- if a person does not submit a new bid and was also not a temporary winner from the previous round, that person must drop out of the auction permanently
- for each house, the highest bid, whether it is a new bid or was the temporary winner from the previous round, is announced, with the person who made that new (temporarily) winning bid being (temporarily) awarded the house to start the next round
rounds continue until no price on any house changes from the previous round
houses are sold to the winning bidders from the final round at the prices that they bid

Outputs:

an \(n \times 1\) vector \(p\) of sales prices
an \(n \times m\) matrix \(S\) of surplus values consisting of all zeros unless person \(j\) bought house \(i\), in which case \(S_{ij} = v_{ij} - p_i\)
an \(n \times (m+1)\) matrix \(Q\) of \(0\)’s and \(1\)’s that tells which buyer bought which house. (The last column accounts for unsold houses.)

Proposed buyer strategy:

In this pseudo code and the actual Python code below, we’ll assume that all buyers choose to use the following strategy

The strategy is optimal for each buyer

Each buyer \(j = 1, \ldots, m\) uses the same strategy.

The strategy has the form:

Let \(\check p^t\) be the \(n \times 1\) vector of prevailing highest-bid prices at the beginning of round \(t\)
Let \(\epsilon>0\) be the minimum bid increment specified by the seller
For each prospective buyer \(j\), compute the index of the best house to bid on during round \(t\), namely \(\hat i_t = \textrm{argmax}_i\{ [ v_{ij} - \check p^t_i - \epsilon ]\}\)
If \(\max_i\{ [ v_{ij} - \check p^t_i - \epsilon ]\} \) \(\leq\) \(0\), person \(j\) permanently drops out of the auction at round \(t\)
If \(v_{\hat i_t, j} - \check p^t_i - \epsilon>0\), person \(j\) bids \(\check p^t_i + \epsilon\) on house \(j\)

Resolving ambiguities: The protocols we have described so far leave open two possible sources of ambiguity.

(1) The optimal bid choice for buyers in each round. It is possible that a buyer has the same surplus value for multiple houses. The argmax function in Python always returns the first argmax element. We instead prefer to randomize among such winner. For that reason, we write our own argmax function below.

(2) Seller’s choice of winner if same price bid cast by several buyers. To resolve this ambiguity, we use the np.random.choice function below.

Given the randomness in outcomes, it is possible that different allocations of houses could emerge from the same inputs.

However, this will happen only when the bid price increment \(\epsilon\) is nonnegligible.

import numpy as np
import prettytable as pt

np.random.seed(100)

np.set_printoptions(precision=3, suppress=True)

7.7. An Example#

Before building a Python class, let’s step by step solve things almost “by hand” to grasp how the auction proceeds.

A step-by-step procedure also helps reduce bugs, especially when the value matrix is peculiar (e.g. the differences between values are negligible, a column containing identical values or multiple buyers have the same valuation etc.).

Fortunately, our auction behaves well and robustly with various peculiar matrices.

We provide some examples later in this lecture.

v = np.array([[8, 5, 9, 4],
              [4, 11, 7, 4],
              [9, 7, 6, 4]])
n, m = v.shape
r = np.array([2, 1, 0])
ϵ = 1
p = r.copy()
buyer_list = np.arange(m)
house_list = np.arange(n)

array([[ 8,  5,  9,  4],
       [ 4, 11,  7,  4],
       [ 9,  7,  6,  4]])

Remember that column indexes \(j\) indicate buyers and row indexes \(i\) indicate houses.

The above value matrix \(v\) is peculiar in the sense that Buyer 3 (indexed from 0) puts the same value \(4\) on every house being sold.

Maybe buyer 3 is a bureaucrat who purchases these house simply by following instructions from his superior.

array([2, 1, 0])

def find_argmax_with_randomness(v):
    """
    We build our own verion of argmax function such that the argmax index will be returned randomly
    when there are multiple maximum values. This function is similiar to np.argmax(v,axis=0)

    Parameters:
    ----------
    v: 2 dimensional np.array

    """

    n, m = v.shape
    index_array = np.arange(n)
    result=[]

    for ii in range(m):
        max_value = v[:,ii].max()
        result.append(np.random.choice(index_array[v[:,ii] == max_value]))

    return np.array(result)

def present_dict(dt):
    """
    A function that present the information in table.

    Parameters:
    ----------
    dt: dictionary.

    """

    ymtb = pt.PrettyTable()
    ymtb.field_names = ['House Number', *dt.keys()]
    ymtb.add_row(['Buyer', *dt.values()])
    print(ymtb)

Check Kick Off Condition

def check_kick_off_condition(v, r, ϵ):
    """
    A function that checks whether the auction could be initiated given the reservation price and value matrix.
    To avoid the situation that the reservation prices are so high that no one would even bid in the first round.

    Parameters:
    ----------
    v : value matrix of the shape (n,m).

    r: the reservation price

    ϵ: the minimun price increment in each round

    """

    # we convert the price vector to a matrix in the same shape as value matrix to facilitate subtraction
    p_start = (ϵ+r)[:,None] @ np.ones(m)[None,:]

    surplus_value = v - p_start
    buyer_decision = (surplus_value > 0).any(axis = 0)
    return buyer_decision.any()

check_kick_off_condition(v, r, ϵ)

True

7.7.1. round 1#

submit bid

def submit_initial_bid(p_initial, ϵ, v):
    """
    A function that describes the bid information in the first round.

    Parameters:
    ----------
    p_initial: the price (or the reservation prices) at the beginning of auction.

    v: the value matrix

    ϵ: the minimun price increment in each round

    Returns:
    ----------
    p: price array after this round of bidding

    bid_info: a dictionary that contains bidding information (house number as keys and buyer as values).

    """

    p = p_initial.copy()
    p_start_mat = (ϵ + p)[:,None] @ np.ones(m)[None,:]
    surplus_value = v - p_start_mat

    # we only care about active buyers who have positve surplus values
    active_buyer_diagnosis = (surplus_value > 0).any(axis = 0)
    active_buyer_list = buyer_list[active_buyer_diagnosis]
    active_buyer_surplus_value = surplus_value[:,active_buyer_diagnosis]
    active_buyer_choice = find_argmax_with_randomness(active_buyer_surplus_value)
    # choice means the favourite houses given the current price and ϵ

    # we only retain the unique house index because prices increase once at one round
    house_bid =  list(set(active_buyer_choice))
    p[house_bid] += ϵ

    bid_info = {}
    for house_num in house_bid:
        bid_info[house_num] = active_buyer_list[active_buyer_choice == house_num]

    return p, bid_info

p, bid_info = submit_initial_bid(p, ϵ, v)

array([3, 2, 1])

present_dict(bid_info)

+--------------+-----+-----+-------+
| House Number |  0  |  1  |   2   |
+--------------+-----+-----+-------+
|    Buyer     | [2] | [1] | [0 3] |
+--------------+-----+-----+-------+

check terminal condition

Notice that two buyers bid for house 2 (indexed from 0).

Because the auction protocol does not specify a selection rule in this case, we simply select a winner randomly.

This is reasonable because the seller can’t distinguish these buyers and doesn’t know the valuation of each buyer.

It is both convenient and practical for him to just pick a winner randomly.

There is a 50% probability that Buyer 3 is chosen as the winner for house 2, although he values it less than buyer 0.

In this case, buyer 0 has to bid one more time with a higher price, which crowds out Buyer 3.

Therefore, final price could be 3 or 4, depending on the winner in the last round.

def check_terminal_condition(bid_info, p, v):
    """
    A function that checks whether the auction ends.

    Recall that the auction ends when either losers have non-positive surplus values for each house
    or there is no loser (every buyer gets a house).

    Parameters:
    ----------
    bid_info: a dictionary that contains bidding information of house numbers (as keys) and buyers (as values).

    p: np.array. price array of houses

    v: value matrix

    Returns:
    ----------
    allocation: a dictionary that descirbe how the houses bid are assigned.

    winner_list: a list of winners

    loser_list: a list of losers

    """

    # there may be several buyers bidding one house, we choose a winner randomly
    winner_list=[np.random.choice(bid_info[ii]) for ii in bid_info.keys()]

    allocation = {house_num:winner for house_num,winner in zip(bid_info.keys(),winner_list)}

    loser_set = set(buyer_list).difference(set(winner_list))
    loser_list = list(loser_set)
    loser_num = len(loser_list)

    if loser_num == 0:
        print('The auction ends because every buyer gets one house.')
        return allocation,winner_list,loser_list

    p_mat = (ϵ + p)[:,None] @ np.ones(loser_num)[None,:]
    loser_surplus_value = v[:,loser_list] - p_mat
    loser_decision = (loser_surplus_value > 0).any(axis = 0)

    print(~(loser_decision.any()))

    return allocation,winner_list,loser_list

allocation,winner_list,loser_list = check_terminal_condition(bid_info, p, v)

False

present_dict(allocation)

+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Buyer     | 2 | 1 | 0 |
+--------------+---+---+---+

winner_list

[2, 1, 0]

loser_list

[3]

7.7.2. round 2#

From the second round on, the auction proceeds differently from the first round.

Now only active losers (those who have positive surplus values) have an incentive to submit bids to displace temporary winners from the previous round.

def submit_bid(loser_list, p, ϵ, v, bid_info):
    """
    A function that executes the bid operation after the first round.
    After the first round, only active losers would cast a new bid with price as old price + increment.
    By such bid, winners of last round are replaced by the active losers.

    Parameters:
    ----------
    loser_list: a list that includes the indexes of losers

    p: np.array. price array of houses

    ϵ: minimum increment of bid price

    v: value matrix

    bid_info: a dictionary that contains bidding information of house numbers (as keys) and buyers (as values).

    Returns:
    ----------
    p_end: a price array after this round of bidding

    bid_info: a dictionary that contains updated bidding information.

    """

    p_end=p.copy()

    loser_num = len(loser_list)
    p_mat = (ϵ + p_end)[:,None] @ np.ones(loser_num)[None,:]
    loser_surplus_value = v[:,loser_list] - p_mat
    loser_decision = (loser_surplus_value > 0).any(axis = 0)

    active_loser_list = np.array(loser_list)[loser_decision]
    active_loser_surplus_value = loser_surplus_value[:,loser_decision]
    active_loser_choice = find_argmax_with_randomness(active_loser_surplus_value)

    # we retain the unique house index and increasing the corresponding bid price
    house_bid = list(set(active_loser_choice))
    p_end[house_bid] += ϵ

    # we record the bidding information from active losers
    bid_info_active_loser = {}
    for house_num in house_bid:
        bid_info_active_loser[house_num] = active_loser_list[active_loser_choice == house_num]

    # we update the bidding information according to the bidding from actice losers
    for house_num in bid_info_active_loser.keys():
        bid_info[house_num] = bid_info_active_loser[house_num]

    return p_end,bid_info

p,bid_info = submit_bid(loser_list, p, ϵ, v, bid_info)

array([3, 2, 2])

present_dict(bid_info)

+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [3] |
+--------------+-----+-----+-----+

allocation,winner_list,loser_list = check_terminal_condition(bid_info, p, v)

False

present_dict(allocation)

+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Buyer     | 2 | 1 | 3 |
+--------------+---+---+---+

7.7.3. round 3#

p,bid_info = submit_bid(loser_list, p, ϵ, v, bid_info)

array([3, 2, 3])

present_dict(bid_info)

+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+

allocation,winner_list,loser_list = check_terminal_condition(bid_info, p, v)

False

present_dict(allocation)

+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Buyer     | 2 | 1 | 0 |
+--------------+---+---+---+

7.7.4. round 4#

p,bid_info = submit_bid(loser_list, p, ϵ, v, bid_info)

array([3, 3, 3])

present_dict(bid_info)

+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [3] | [0] |
+--------------+-----+-----+-----+

Notice that Buyer 3 now switches to bid for house 1 having recongized that house 2 is no longer his best option.

allocation,winner_list,loser_list = check_terminal_condition(bid_info, p, v)

False

present_dict(allocation)

+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Buyer     | 2 | 3 | 0 |
+--------------+---+---+---+

7.7.5. round 5#

p,bid_info = submit_bid(loser_list, p, ϵ, v, bid_info)

array([3, 4, 3])

present_dict(bid_info)

+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+

Now Buyer 1 bids for house 1 again with price at 4, which crowds out Buyer 3, marking the end of the auction.

allocation,winner_list,loser_list = check_terminal_condition(bid_info, p, v)

True

present_dict(allocation)

+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Buyer     | 2 | 1 | 0 |
+--------------+---+---+---+

# as for the houses unsold

house_unsold_list = list(set(house_list).difference(set(allocation.keys())))
house_unsold_list

[]

total_revenue = p[list(allocation.keys())].sum()
total_revenue

7.8. A Python Class#

Above we simulated an ascending bid auction step by step.

When defining functions, we repeatedly computed some intermediate objects because our Python function loses track of variables once the function is executed.

That of course led to redundancy in our code

It is much more efficient to collect all of the aforementioned code into a class that records information about all rounds.

class ascending_bid_auction:

    def __init__(self, v, r, ϵ):
        """
        A class that simulates an ascending bid auction for houses.

        Given buyers' value matrix, sellers' reservation prices and minimum increment of bid prices,
        this class can execute an ascending bid auction and present information round by round until the end.

        Parameters:
        ----------
        v: 2 dimensional value matrix

        r: np.array of reservation prices

        ϵ: minimum increment of bid price

        """

        self.v = v.copy()
        self.n,self.m = self.v.shape
        self.r = r
        self.ϵ = ϵ
        self.p = r.copy()
        self.buyer_list = np.arange(self.m)
        self.house_list = np.arange(self.n)
        self.bid_info_history = []
        self.allocation_history = []
        self.winner_history = []
        self.loser_history = []


    def find_argmax_with_randomness(self, v):
        n,m = v.shape
        index_array = np.arange(n)
        result=[]

        for ii in range(m):
            max_value = v[:,ii].max()
            result.append(np.random.choice(index_array[v[:,ii] == max_value]))

        return np.array(result)


    def check_kick_off_condition(self):
        # we convert the price vector to a matrix in the same shape as value matrix to facilitate subtraction
        p_start = (self.ϵ + self.r)[:,None] @ np.ones(self.m)[None,:]
        self.surplus_value = self.v - p_start
        buyer_decision = (self.surplus_value > 0).any(axis = 0)
        return buyer_decision.any()


    def submit_initial_bid(self):
        # we intend to find the optimal choice of each buyer
        p_start_mat = (self.ϵ + self.p)[:,None] @ np.ones(self.m)[None,:]
        self.surplus_value = self.v - p_start_mat

        # we only care about active buyers who have positve surplus values
        active_buyer_diagnosis = (self.surplus_value > 0).any(axis = 0)
        active_buyer_list = self.buyer_list[active_buyer_diagnosis]
        active_buyer_surplus_value = self.surplus_value[:,active_buyer_diagnosis]
        active_buyer_choice = self.find_argmax_with_randomness(active_buyer_surplus_value)

        # we only retain the unique house index because prices increase once at one round
        house_bid =  list(set(active_buyer_choice))
        self.p[house_bid] += self.ϵ

        bid_info = {}
        for house_num in house_bid:
            bid_info[house_num] = active_buyer_list[active_buyer_choice == house_num]
        self.bid_info_history.append(bid_info)

        print('The bid information is')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['House Number', *bid_info.keys()]
        ymtb.add_row(['Buyer', *bid_info.values()])
        print(ymtb)

        print('The bid prices for houses are')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['House Number', *self.house_list]
        ymtb.add_row(['Price', *self.p])
        print(ymtb)

        self.winner_list=[np.random.choice(bid_info[ii]) for ii in bid_info.keys()]
        self.winner_history.append(self.winner_list)

        self.allocation = {house_num:[winner] for house_num,winner in zip(bid_info.keys(),self.winner_list)}
        self.allocation_history.append(self.allocation)

        loser_set = set(self.buyer_list).difference(set(self.winner_list))
        self.loser_list = list(loser_set)
        self.loser_history.append(self.loser_list)

        print('The winners are')
        print(self.winner_list)

        print('The losers are')
        print(self.loser_list)
        print('\n')


    def check_terminal_condition(self):
        loser_num = len(self.loser_list)

        if loser_num == 0:
            print('The auction ends because every buyer gets one house.')
            print('\n')
            return True

        p_mat = (self.ϵ + self.p)[:,None] @ np.ones(loser_num)[None,:]
        self.loser_surplus_value = self.v[:,self.loser_list] - p_mat
        self.loser_decision = (self.loser_surplus_value > 0).any(axis = 0)

        return ~(self.loser_decision.any())


    def submit_bid(self):
        bid_info = self.allocation_history[-1].copy()  # we only record the bid info of winner

        loser_num = len(self.loser_list)
        p_mat = (self.ϵ + self.p)[:,None] @ np.ones(loser_num)[None,:]
        self.loser_surplus_value = self.v[:,self.loser_list] - p_mat
        self.loser_decision = (self.loser_surplus_value > 0).any(axis = 0)

        active_loser_list = np.array(self.loser_list)[self.loser_decision]
        active_loser_surplus_value = self.loser_surplus_value[:,self.loser_decision]
        active_loser_choice = self.find_argmax_with_randomness(active_loser_surplus_value)

        # we retain the unique house index and increasing the corresponding bid price
        house_bid = list(set(active_loser_choice))
        self.p[house_bid] += self.ϵ

        # we record the bidding information from active losers
        bid_info_active_loser = {}
        for house_num in house_bid:
            bid_info_active_loser[house_num] = active_loser_list[active_loser_choice == house_num]

        # we update the bidding information according to the bidding from actice losers
        for house_num in bid_info_active_loser.keys():
            bid_info[house_num] = bid_info_active_loser[house_num]
        self.bid_info_history.append(bid_info)

        print('The bid information is')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['House Number', *bid_info.keys()]
        ymtb.add_row(['Buyer', *bid_info.values()])
        print(ymtb)

        print('The bid prices for houses are')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['House Number', *self.house_list]
        ymtb.add_row(['Price', *self.p])
        print(ymtb)

        self.winner_list=[np.random.choice(bid_info[ii]) for ii in bid_info.keys()]
        self.winner_history.append(self.winner_list)

        self.allocation = {house_num:[winner] for house_num,winner in zip(bid_info.keys(),self.winner_list)}
        self.allocation_history.append(self.allocation)

        loser_set = set(self.buyer_list).difference(set(self.winner_list))
        self.loser_list = list(loser_set)
        self.loser_history.append(self.loser_list)

        print('The winners are')
        print(self.winner_list)

        print('The losers are')
        print(self.loser_list)
        print('\n')


    def start_auction(self):
        print('The Ascending Bid Auction for Houses')
        print('\n')

        print('Basic Information: %d houses, %d buyers'%(self.n, self.m))

        print('The valuation matrix is as follows')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['Buyer Number', *(np.arange(self.m))]
        for ii in range(self.n):
            ymtb.add_row(['House %d'%(ii), *self.v[ii,:]])
        print(ymtb)

        print('The reservation prices for houses are')
        ymtb = pt.PrettyTable()
        ymtb.field_names = ['House Number', *self.house_list]
        ymtb.add_row(['Price', *self.r])
        print(ymtb)
        print('The minimum increment of bid price is %.2f' % self.ϵ)
        print('\n')

        ctr = 1
        if self.check_kick_off_condition():
            print('Auction starts successfully')
            print('\n')
            print('Round %d'% ctr)

            self.submit_initial_bid()

            while True:
                if self.check_terminal_condition():
                    print('Auction ends')
                    print('\n')

                    print('The final result is as follows')
                    print('\n')
                    print('The allocation plan is')
                    ymtb = pt.PrettyTable()
                    ymtb.field_names = ['House Number', *self.allocation.keys()]
                    ymtb.add_row(['Buyer', *self.allocation.values()])
                    print(ymtb)

                    print('The bid prices for houses are')
                    ymtb = pt.PrettyTable()
                    ymtb.field_names = ['House Number', *self.house_list]
                    ymtb.add_row(['Price', *self.p])
                    print(ymtb)

                    print('The winners are')
                    print(self.winner_list)

                    print('The losers are')
                    print(self.loser_list)

                    self.house_unsold_list = list(set(self.house_list).difference(set(self.allocation.keys())))
                    print('The houses unsold are')
                    print(self.house_unsold_list)

                    self.total_revenue = self.p[list(self.allocation.keys())].sum()
                    print('The total revenue is %.2f' % self.total_revenue)

                    break

                ctr += 1
                print('Round %d'% ctr)
                self.submit_bid()

            # we compute the surplus matrix S and the quantity matrix X as required in 1.1
            self.S = np.zeros((self.n, self.m))
            for ii,jj in zip(self.allocation.keys(),self.allocation.values()):
                self.S[ii,jj] = self.v[ii,jj] - self.p[ii]

            self.Q = np.zeros((self.n, self.m + 1))  # the last column records the houses unsold
            for ii,jj in zip(self.allocation.keys(),self.allocation.values()):
                self.Q[ii,jj] = 1
            for ii in self.house_unsold_list:
                self.Q[ii,-1] = 1

            # we sort the allocation result by the house number
            house_sold_list = list(self.allocation.keys())
            house_sold_list.sort()

            dict_temp = {}
            for ii in house_sold_list:
                dict_temp[ii] = self.allocation[ii]
            self.allocation = dict_temp

        else:
            print('The auction can not start because of high reservation prices')

Let’s use our class to conduct the auction described in one of the above examples.

v = np.array([[8,5,9,4],[4,11,7,4],[9,7,6,4]])
r = np.array([2,1,0])
ϵ = 1

auction_1 = ascending_bid_auction(v, r, ϵ)

auction_1.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 3 houses, 4 buyers
The valuation matrix is as follows
+--------------+---+----+---+---+
| Buyer Number | 0 | 1  | 2 | 3 |
+--------------+---+----+---+---+
|   House 0    | 8 | 5  | 9 | 4 |
|   House 1    | 4 | 11 | 7 | 4 |
|   House 2    | 9 | 7  | 6 | 4 |
+--------------+---+----+---+---+
The reservation prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 2 | 1 | 0 |
+--------------+---+---+---+
The minimum increment of bid price is 1.00


Auction starts successfully


Round 1
The bid information is
+--------------+-----+-----+-------+
| House Number |  0  |  1  |   2   |
+--------------+-----+-----+-------+
|    Buyer     | [2] | [1] | [0 3] |
+--------------+-----+-----+-------+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 1 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3]


Round 2
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [3] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 2 |
+--------------+---+---+---+
The winners are
[2, 1, 3]
The losers are
[0]


Round 3
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 3 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3]


Round 4
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [3] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 3 | 3 |
+--------------+---+---+---+
The winners are
[2, 3, 0]
The losers are
[1]


Round 5
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 4 | 3 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3]


Auction ends


The final result is as follows


The allocation plan is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 4 | 3 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3]
The houses unsold are
[]
The total revenue is 10.00

# the surplus matrix S

auction_1.S

array([[0., 0., 6., 0.],
       [0., 7., 0., 0.],
       [6., 0., 0., 0.]])

# the quantity matrix X

auction_1.Q

array([[0., 0., 1., 0., 0.],
       [0., 1., 0., 0., 0.],
       [1., 0., 0., 0., 0.]])

7.9. Robustness Checks#

Let’s do some stress testing of our code by applying it to auctions characterized by different matrices of private values.

1. number of houses = number of buyers

v2 = np.array([[8,5,9],[4,11,7],[9,7,6]])

auction_2 = ascending_bid_auction(v2, r, ϵ)

auction_2.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 3 houses, 3 buyers
The valuation matrix is as follows
+--------------+---+----+---+
| Buyer Number | 0 | 1  | 2 |
+--------------+---+----+---+
|   House 0    | 8 | 5  | 9 |
|   House 1    | 4 | 11 | 7 |
|   House 2    | 9 | 7  | 6 |
+--------------+---+----+---+
The reservation prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 2 | 1 | 0 |
+--------------+---+---+---+
The minimum increment of bid price is 1.00


Auction starts successfully


Round 1
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 1 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[]


The auction ends because every buyer gets one house.


Auction ends


The final result is as follows


The allocation plan is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 1 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[]
The houses unsold are
[]
The total revenue is 6.00

2. multilple excess buyers

v3 = np.array([[8,5,9,4,3],[4,11,7,4,6],[9,7,6,4,2]])

auction_3 = ascending_bid_auction(v3, r, ϵ)

auction_3.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 3 houses, 5 buyers
The valuation matrix is as follows
+--------------+---+----+---+---+---+
| Buyer Number | 0 | 1  | 2 | 3 | 4 |
+--------------+---+----+---+---+---+
|   House 0    | 8 | 5  | 9 | 4 | 3 |
|   House 1    | 4 | 11 | 7 | 4 | 6 |
|   House 2    | 9 | 7  | 6 | 4 | 2 |
+--------------+---+----+---+---+---+
The reservation prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 2 | 1 | 0 |
+--------------+---+---+---+
The minimum increment of bid price is 1.00


Auction starts successfully


Round 1
The bid information is
+--------------+-----+-------+-------+
| House Number |  0  |   1   |   2   |
+--------------+-----+-------+-------+
|    Buyer     | [2] | [1 4] | [0 3] |
+--------------+-----+-------+-------+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 2 | 1 |
+--------------+---+---+---+
The winners are
[2, 4, 3]
The losers are
[0, 1]


Round 2
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 3 | 2 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3, 4]


Round 3
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [4] | [3] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 4 | 3 |
+--------------+---+---+---+
The winners are
[2, 4, 3]
The losers are
[0, 1]


Round 4
The bid information is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 5 | 4 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3, 4]


Auction ends


The final result is as follows


The allocation plan is
+--------------+-----+-----+-----+
| House Number |  0  |  1  |  2  |
+--------------+-----+-----+-----+
|    Buyer     | [2] | [1] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+
| House Number | 0 | 1 | 2 |
+--------------+---+---+---+
|    Price     | 3 | 5 | 4 |
+--------------+---+---+---+
The winners are
[2, 1, 0]
The losers are
[3, 4]
The houses unsold are
[]
The total revenue is 12.00

3. more houses than buyers

v4 = np.array([[8,5,4],[4,11,7],[9,7,9],[6,4,5],[2,2,2]])
r2 = np.array([2,1,0,1,1])

auction_4 = ascending_bid_auction(v4, r2, ϵ)

auction_4.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 5 houses, 3 buyers
The valuation matrix is as follows
+--------------+---+----+---+
| Buyer Number | 0 | 1  | 2 |
+--------------+---+----+---+
|   House 0    | 8 | 5  | 4 |
|   House 1    | 4 | 11 | 7 |
|   House 2    | 9 | 7  | 9 |
|   House 3    | 6 | 4  | 5 |
|   House 4    | 2 | 2  | 2 |
+--------------+---+----+---+
The reservation prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 1 | 0 | 1 | 1 |
+--------------+---+---+---+---+---+
The minimum increment of bid price is 1.00


Auction starts successfully


Round 1
The bid information is
+--------------+-----+-------+
| House Number |  1  |   2   |
+--------------+-----+-------+
|    Buyer     | [1] | [0 2] |
+--------------+-----+-------+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 2 | 1 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 2
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 2 | 2 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 3
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [2] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 2 | 3 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 4
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 2 | 4 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 5
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [2] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 3 | 4 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[2, 0]
The losers are
[1]


Round 6
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 4 | 4 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 7
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [2] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 2 | 4 | 5 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 8
The bid information is
+--------------+-----+-----+-----+
| House Number |  1  |  2  |  0  |
+--------------+-----+-----+-----+
|    Buyer     | [1] | [2] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 3 | 4 | 5 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 2, 0]
The losers are
[]


The auction ends because every buyer gets one house.


Auction ends


The final result is as follows


The allocation plan is
+--------------+-----+-----+-----+
| House Number |  1  |  2  |  0  |
+--------------+-----+-----+-----+
|    Buyer     | [1] | [2] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+---+---+---+---+---+
| House Number | 0 | 1 | 2 | 3 | 4 |
+--------------+---+---+---+---+---+
|    Price     | 3 | 4 | 5 | 1 | 1 |
+--------------+---+---+---+---+---+
The winners are
[1, 2, 0]
The losers are
[]
The houses unsold are
[3, 4]
The total revenue is 12.00

4. some houses have extremely high reservation prices

v5 = np.array([[8,5,4],[4,11,7],[9,7,9],[6,4,5],[2,2,2]])
r3 = np.array([10,1,0,1,1])

auction_5 = ascending_bid_auction(v5, r3, ϵ)

auction_5.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 5 houses, 3 buyers
The valuation matrix is as follows
+--------------+---+----+---+
| Buyer Number | 0 | 1  | 2 |
+--------------+---+----+---+
|   House 0    | 8 | 5  | 4 |
|   House 1    | 4 | 11 | 7 |
|   House 2    | 9 | 7  | 9 |
|   House 3    | 6 | 4  | 5 |
|   House 4    | 2 | 2  | 2 |
+--------------+---+----+---+
The reservation prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 1 | 0 | 1 | 1 |
+--------------+----+---+---+---+---+
The minimum increment of bid price is 1.00


Auction starts successfully


Round 1
The bid information is
+--------------+-----+-------+
| House Number |  1  |   2   |
+--------------+-----+-------+
|    Buyer     | [1] | [0 2] |
+--------------+-----+-------+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 2 | 1 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 2
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [2] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 2 | 2 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 3
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 2 | 3 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 4
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [2] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 2 | 4 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 5
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 2 | 5 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 6
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [2] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 3 | 5 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[2, 0]
The losers are
[1]


Round 7
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [0] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 4 | 5 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 0]
The losers are
[2]


Round 8
The bid information is
+--------------+-----+-----+
| House Number |  1  |  2  |
+--------------+-----+-----+
|    Buyer     | [1] | [2] |
+--------------+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 4 | 6 | 1 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 2]
The losers are
[0]


Round 9
The bid information is
+--------------+-----+-----+-----+
| House Number |  1  |  2  |  3  |
+--------------+-----+-----+-----+
|    Buyer     | [1] | [2] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 4 | 6 | 2 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 2, 0]
The losers are
[]


The auction ends because every buyer gets one house.


Auction ends


The final result is as follows


The allocation plan is
+--------------+-----+-----+-----+
| House Number |  1  |  2  |  3  |
+--------------+-----+-----+-----+
|    Buyer     | [1] | [2] | [0] |
+--------------+-----+-----+-----+
The bid prices for houses are
+--------------+----+---+---+---+---+
| House Number | 0  | 1 | 2 | 3 | 4 |
+--------------+----+---+---+---+---+
|    Price     | 10 | 4 | 6 | 2 | 1 |
+--------------+----+---+---+---+---+
The winners are
[1, 2, 0]
The losers are
[]
The houses unsold are
[0, 4]
The total revenue is 12.00

5. reservation prices are so high that the auction can’t start

r4 = np.array([15,15,15])

auction_6 = ascending_bid_auction(v, r4, ϵ)

auction_6.start_auction()

The Ascending Bid Auction for Houses


Basic Information: 3 houses, 4 buyers
The valuation matrix is as follows
+--------------+---+----+---+---+
| Buyer Number | 0 | 1  | 2 | 3 |
+--------------+---+----+---+---+
|   House 0    | 8 | 5  | 9 | 4 |
|   House 1    | 4 | 11 | 7 | 4 |
|   House 2    | 9 | 7  | 6 | 4 |
+--------------+---+----+---+---+
The reservation prices for houses are
+--------------+----+----+----+
| House Number | 0  | 1  | 2  |
+--------------+----+----+----+
|    Price     | 15 | 15 | 15 |
+--------------+----+----+----+
The minimum increment of bid price is 1.00


The auction can not start because of high reservation prices

7.10. A Groves-Clarke Mechanism#

We now decribe an alternative way for society to allocate \(n\) houses to \(m\) possible buyers in a way that maximizes total value across all potential buyers.

We continue to assume that each buyer can purchase at most one house.

The mechanism is a very special case of a Groves-Clarke mechanism [Groves, 1973], [Clarke, 1971].

Its special structure substantially simplifies writing Python code to find an optimal allocation.

Our mechanims works like this.

The values \(V_{ij}\) are private information to person \(j\)
The mechanism makes each person \(j\) willing to tell a social planner his private values \(V_{i,j}\) for all \(i = 1, \ldots, n\).
The social planner asks all potential bidders to tell the planner their private values \(V_{ij}\)
The social planner tells no one these, but uses them to allocate houses and set prices
The mechanism is designed in a way that makes all prospective buyers want to tell the planner their private values
- truth telling is a dominant strategy for each potential buyer
The planner finds a house, bidder pair with highest private value by computing \((\tilde i, \tilde j) = \operatorname{argmax} (V_{ij})\)
The planner assigns house \(\tilde i \) to buyer \(\tilde j\)
The planner charges buyer \(\tilde j\) the price \(\max_{- \tilde j} V_{\tilde i, j}\), where \(- \tilde j\) means all \(j\)’s except \(\tilde j\).
The planner creates a matrix of private values for the remaining houses \(-\tilde i\) by deleting row (i.e., house) \(\tilde i\) and column (i.e., buyer) \(\tilde j\) from \(V\).
- (But in doing this, the planner keeps track of the real names of the bidders and the houses).
The planner returns to the original step and repeat it.
The planner iterates until all \(n\) houses are allocated and the charges for all \(n\) houses are set.

7.11. An Example Solved by Hand#

Let’s see how our Groves-Clarke algorithm would work for the following simple matrix \(V\) matrix of private values

\[ V =\begin{bmatrix} 10 & 9 & 8 & 7 & 6 \cr 9 & 9 & 7 & 6 & 6 \cr 8 & 6 & 6 & 9 & 4 \cr 7 & 5 & 6 & 4 & 9 \end{bmatrix} \]

Remark: In the first step, when the highest private value corresponds to more than one house, bidder pairs, we choose the pair with the highest sale price. If a highest sale price corresponds to two or more pairs with highest private values, we randomly choose one.

np.random.seed(666)

V_orig = np.array([[10, 9, 8, 7, 6],  # record the origianl values
                   [9, 9, 7, 6, 6],
                   [8, 6, 6, 9, 4],
                   [7, 5, 6, 4, 9]])
V = np.copy(V_orig)  # used iteratively
n, m = V.shape
p = np.zeros(n) # prices of houses
Q = np.zeros((n, m)) # keep record the status of houses and buyers

First assignment

First, we find house, bidder pair with highest private value.

i, j = np.where(V==np.max(V))
i, j

(array([0]), array([0]))

So, house 0 will be sold to buyer 0 at a price of 9. We then update the sale price of house 0 and the status matrix Q.

p[i] = np.max(np.delete(V[i, :], j))
Q[i, j] = 1
p, Q

(array([9., 0., 0., 0.]),
 array([[1., 0., 0., 0., 0.],
        [0., 0., 0., 0., 0.],
        [0., 0., 0., 0., 0.],
        [0., 0., 0., 0., 0.]]))

Then we remove row 0 and column 0 from \(V\). To keep the real number of houses and buyers, we set this row and this column to -1, which will have the same result as removing them since \(V \geq 0\).

V[i, :] = -1
V[:, j] = -1
V

array([[-1, -1, -1, -1, -1],
       [-1,  9,  7,  6,  6],
       [-1,  6,  6,  9,  4],
       [-1,  5,  6,  4,  9]])

Second assignment

We find house, bidder pair with the highest private value again.

i, j = np.where(V==np.max(V))
i, j

(array([1, 2, 3]), array([1, 3, 4]))

In this special example, there are three pairs (1, 1), (2, 3) and (3, 4) with the highest private value. To solve this problem, we choose the one with highest sale price.

p_candidate = np.zeros(len(i))
for k in range(len(i)):
    p_candidate[k] = np.max(np.delete(V[i[k], :], j[k]))
k, = np.where(p_candidate==np.max(p_candidate))
i, j = i[k], j[k]
i, j

(array([1]), array([1]))

So, house 1 will be sold to buyer 1 at a price of 7. We update matrices.

p[i] = np.max(np.delete(V[i, :], j))
Q[i, j] = 1
V[i, :] = -1
V[:, j] = -1
p, Q, V

(array([9., 7., 0., 0.]),
 array([[1., 0., 0., 0., 0.],
        [0., 1., 0., 0., 0.],
        [0., 0., 0., 0., 0.],
        [0., 0., 0., 0., 0.]]),
 array([[-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1],
        [-1, -1,  6,  9,  4],
        [-1, -1,  6,  4,  9]]))

Third assignment

i, j = np.where(V==np.max(V))
i, j

(array([2, 3]), array([3, 4]))

In this special example, there are two pairs (2, 3) and (3, 4) with the highest private value.

To resolve the assignment, we choose the one with highest sale price.

p_candidate = np.zeros(len(i))
for k in range(len(i)):
    p_candidate[k] = np.max(np.delete(V[i[k], :], j[k]))
k, = np.where(p_candidate==np.max(p_candidate))
i, j = i[k], j[k]
i, j

(array([2, 3]), array([3, 4]))

The two pairs even have the same sale price.

We randomly choose one pair.

k = np.random.choice(len(i))
i, j = i[k], j[k]
i, j

(2, 3)

Finally, house 2 will be sold to buyer 3.

We update matrices accordingly.

p[i] = np.max(np.delete(V[i, :], j))
Q[i, j] = 1
V[i, :] = -1
V[:, j] = -1
p, Q, V

(array([9., 7., 6., 0.]),
 array([[1., 0., 0., 0., 0.],
        [0., 1., 0., 0., 0.],
        [0., 0., 0., 1., 0.],
        [0., 0., 0., 0., 0.]]),
 array([[-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1],
        [-1, -1,  6, -1,  9]]))

Fourth assignment

i, j = np.where(V==np.max(V))
i, j

(array([3]), array([4]))

House 3 will be sold to buyer 4.

The final outcome follows.

p[i] = np.max(np.delete(V[i, :], j))
Q[i, j] = 1
V[i, :] = -1
V[:, j] = -1
S = V_orig*Q - np.diag(p)@Q
p, Q, V, S

(array([9., 7., 6., 6.]),
 array([[1., 0., 0., 0., 0.],
        [0., 1., 0., 0., 0.],
        [0., 0., 0., 1., 0.],
        [0., 0., 0., 0., 1.]]),
 array([[-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1],
        [-1, -1, -1, -1, -1]]),
 array([[1., 0., 0., 0., 0.],
        [0., 2., 0., 0., 0.],
        [0., 0., 0., 3., 0.],
        [0., 0., 0., 0., 3.]]))

7.12. Another Python Class#

It is efficient to assemble our calculations in a single Python Class.

class GC_Mechanism:

    def __init__(self, V):
        """
        Implementation of the special Groves Clarke Mechanism for house auction.

        Parameters:
        ----------
        V: 2 dimensional private value matrix

        """

        self.V_orig = V.copy()
        self.V = V.copy()
        self.n, self.m = self.V.shape
        self.p = np.zeros(self.n)
        self.Q = np.zeros((self.n, self.m))
        self.S = np.copy(self.Q)

    def find_argmax(self):
        """
        Find the house-buyer pair with the highest value.
        When the highest private value corresponds to more than one house, bidder pairs,
        we choose the pair with the highest sale price.
        Moreoever, if the highest sale price corresponds to two or more pairs with highest private value,
        We randomly choose one.

        Parameters:
        ----------
        V: 2 dimensional private value matrix with -1 indicating revomed rows and columns

        Returns:
        ----------
        i: the index of the sold house

        j: the index of the buyer

        """
        i, j = np.where(self.V==np.max(self.V))

        if (len(i)>1):
            p_candidate = np.zeros(len(i))
            for k in range(len(i)):
                p_candidate[k] = np.max(np.delete(self.V[i[k], :], j[k]))
            k, = np.where(p_candidate==np.max(p_candidate))
            i, j = i[k], j[k]

            if (len(i)>1):
                k = np.random.choice(len(i))
                k = np.array([k])
                i, j = i[k], j[k]
        return i, j

    def update_status(self, i, j):
        self.p[i] = np.max(np.delete(self.V[i, :], j))
        self.Q[i, j] = 1
        self.V[i, :] = -1
        self.V[:, j] = -1

    def calculate_surplus(self):
        self.S = self.V_orig*self.Q - np.diag(self.p)@self.Q

    def start(self):
        while (np.max(self.V)>=0):
            i, j = self.find_argmax()
            self.update_status(i, j)
            print("House %i is sold to buyer %i at price %i"%(i[0], j[0], self.p[i[0]]))
            print("\n")
        self.calculate_surplus()
        print("Prices of house:\n", self.p)
        print("\n")
        print("The status matrix:\n", self.Q)
        print("\n")
        print("The surplus matrix:\n", self.S)

np.random.seed(666)

V_orig = np.array([[10, 9, 8, 7, 6],
                   [9, 9, 7, 6, 6],
                   [8, 6, 6, 9, 4],
                   [7, 5, 6, 4, 9]])
gc_mechanism = GC_Mechanism(V_orig)
gc_mechanism.start()

House 0 is sold to buyer 0 at price 9

House 1 is sold to buyer 1 at price 7

House 2 is sold to buyer 3 at price 6

House 3 is sold to buyer 4 at price 6


Prices of house:
 [9. 7. 6. 6.]


The status matrix:
 [[1. 0. 0. 0. 0.]
 [0. 1. 0. 0. 0.]
 [0. 0. 0. 1. 0.]
 [0. 0. 0. 0. 1.]]


The surplus matrix:
 [[1. 0. 0. 0. 0.]
 [0. 2. 0. 0. 0.]
 [0. 0. 0. 3. 0.]
 [0. 0. 0. 0. 3.]]

7.12.1. Elaborations#

Here we use some additional notation designed to conform with standard notation in parts of the VCG literature.

We want to verify that our pseudo code is indeed a pivot mechanism, also called a VCG (Vickrey-Clarke-Groves) mechanism.

The mechanism is named after [Groves, 1973], [Clarke, 1971], and [Vickrey, 1961].

To prepare for verifying this, we add some notation.

Let \(X\) be the set of feasible allocations of houses under the protocols above (i.e., at most one house to each person).

Let \(X(v)\) be the allocation that the mechanism chooses for matrix \(v\) of private values.

The mechanism maps a matrix \(v\) of private values into an \(x \in X\).

Let \(v_j(x)\) be the value that person \(j\) attaches to allocation \(x \in X\).

Let \(\check t_j(v)\) the payment that the mechanism charges person \(j\).

The VCG mechanism chooses the allocation

(7.1)#\[ X(v) = \operatorname{argmax}_{x \in X} \sum_{j=1}^m v_j(x) \]

and charges person \(j\) a “social cost”

(7.2)#\[ \check t_j(v) = \max_{x \in X} \sum_{k \neq j} v_k(x) - \sum_{k \neq j} v_k(X(v)) \]

In our setting, equation (7.1) says that the VCG allocation allocates houses to maximize the total value of the successful prospective buyers.

In our setting, equation (7.2) says that the mechanism charges people for the externality that their presence in society imposes on other prospective buyers.

Thus, notice that according to equation (7.2):

unsuccessful prospective buyers pay \(0\) because removing them from “society” would not affect the allocation chosen by the mechanim
successful prospective buyers pay the difference between the total value society could achieve without them present and the total value that others present in society do achieve under the mechanism.

The generalized second-price auction described in our pseudo code above does indeed satisfy (1). We want to compute \(\check t_j\) for \(j = 1, \ldots, m\) and compare with \(p_j\) from the second price auction.

7. Multiple Good Allocation Mechanisms#

7.1. Overview#

7.2. Ascending Bids Auction for Multiple Goods#

7.3. A Benevolent Planner#

7.4. Equivalence of Allocations#

7.5. Ascending Bid Auction#

7.5.1. Basic Setting#

7.6. Pseudocode#

7.7. An Example#

7.7.1. round 1#

7.7.2. round 2#

7.7.3. round 3#

7.7.4. round 4#

7.7.5. round 5#

7.8. A Python Class#

7.9. Robustness Checks#

7.10. A Groves-Clarke Mechanism#

7.11. An Example Solved by Hand#

7.12. Another Python Class#

7.12.1. Elaborations#

7.12.2. Social Cost#